ГлавнаяРейтингиЧемпионатыРегистрацияТусовкаФорум Поиск

 Вопросы, идеи, желание пообщаться? Заходите на наш форум!

Тест: Networking Essentials

Описание теста:
Networking Essentials
Пройти тест >>


What is the most common type of digital line used in most networks today?

What is the definition of attenuation?

Which of the following describes the 10Base5 cable type?

You installed a Windows 95 client in your network, and you are running a Novell network with version 3.12. What is needed to gain access to the application GAMES on the Novell NETWARE server?

To avoid data loss and reduced downtime, which is the best method of fault tolerance?

Impedance is defined as:

What type of hardware connector assembly is used by 10Base2 for connection to a standard Network Adapter Card?

Which of the following is a non- routable transport protocol?

Which of the following is used for dial-up data communications protocols?

Which of the following statements is true of NetBEUI?

Which type of connector assembly is responsible for twisted-pair?

Which of the following protocols is an NDIS x.x-compliant version of the Internetwork Packet Exchange protocol?

Which of the following types of cable can transmit 1,000 m without a repeater working at the physical layer of the OSI model?

Which of the following cable types can be used for 100 Mbps networks?

Which system parameter determines whether a file requests is intended for the local computer or for a remote computer on the network?

Which sub layer of the Data Link layer directly communicates with the Network Adapter Card assembly?

Raw data bits that convert into data frames are handled by which layer of the OSI model?

Translating the data format is the responsibility of which layer of the OSI model?

If your goal is to increase the strength of a baseband signal over a long cable length, which device would solve the problem in your design?

Which of the following is an implementation of packet switching technology?

You have just finished a design that connects Unix and Windows NT operating systems. Which protocol is used in your design to enable communication between the two systems?

Which of the following is a TCP/IP protocol for monitoring networks?

You are setting up a network in your new office for the first time, and there is no preinstalled wiring. Which type of cabling should you consider first?

You want to allow users to access network resources freely, and you also want to protect a few resources with special passwords. Which of the following security models should you implement?

Of the statements below which three describe 10Base5?

Your existing 10Base2 Ethernet cable is 185 meters long. You are planning to extend your network by adding another 100 meters of cable. Therefore, the total length of the cable will be 285 meters. If the network uses NetBEUI, which of the following devices should you use?

From the list below, what Windows NT special groups are created during the installation of Windows NT?

At which layer of the OSI model does a repeater operate?

What tool helps the network administrator view operations in real-time for processors, hard disks, memory, network utilization, and the network as a whole on a Windows NT server?

What is the set of message-handling standards developed by the CCITT?

What tools do Microsoft provide that allows a broader scope on network systems management with centralized administration of all computers in a WAN?

From the list below, select three duties of a network adapter.

You are in charge of installing cables for an Ethernet network in your office. Your building has limited workspace, and the cable at their share of existing conduit with the phone system cable. The maximum length of the cable segment is 320 ft.

Which type of cable should you install in this situation?

You are in charge of installing cables for an Ethernet network in your office. Your building has limited workspace, and the cable at their share of existing conduit with the phone system cable. The maximum length of the cable segment is 320 ft.

Based on the situation above, how many pairs are needed to connect to a 10BaseT network?

Of the Internet tools listed below, which is used to assist validating hosts that are active on the Internet?

What happens in the Network layer in the network adapter if the router cannot transmit the data chunk as large as the source computer sense?

What is the transmission rate of a frequency-hopping transmission scheme?

Имя:
Пароль:
Забыли пароль?


Регистрация
  Нас более 335 тысяч.
  Присоединяйтесь!

О проекте :: Реклама :: Сотрудничество :: Наши партнеры :: О создателях
TopList Яндекс цитирования